Jump to content

Formosa tomahawk 580-620


Scratchie

Recommended Posts

G'day raiders,

Well, I've finally decided that it's time to get a bigger boat! (Please don't tell scratchie)!

After much deliberation and thought about the uses I require a boat for, I've decided on a Formosa tomahawk!

I have been on one but I would like to know from experience by other raiders.........

Negative and positives???

Faults to look for???

Other options??? (Similar style boat) and why???

Cheers scratchie!!!

Link to comment
Share on other sites

I have a 580 tomahawk centre cab which is my second formosa iv had and soon be getting a new one they are great to fish out of . The ride is as good of a ride as you can get i think and loves the following sea and iv got a 140hp suzuki with a full tank of fuel and 3 fat blokes and gear it will do 33 knots

only things i don't like is not enough storage and the height of the wind screen I'm 177cm and i seem to be looking through the top frame when standing up driving

Link to comment
Share on other sites

G'day Scratchie,

I have had a 6.2 Formosa Tomahawk (half cab) fitted with a 150 Yamaha 4 stroke for the past 5 year and find it pretty

good, plenty of fishing room and stable at rest. I did have one problem a couple of years after purchase with the under floor fuel lines disintegrating and in a sealed floor boat was a bit interesting to say the least. I use a mobile marine mechanic who was able to sort out the problem, to be fair to the Formosa manufacturers they came to the party with a lot of my out of pocket expenses after I called them and sent a few photos of the issues. something to check on!

Good luck with the new purchase.

Cheers,

Thommo

Link to comment
Share on other sites

G'day Scratchie,

I have had a 6.2 Formosa Tomahawk (half cab) fitted with a 150 Yamaha 4 stroke for the past 5 year and find it pretty

good, plenty of fishing room and stable at rest. I did have one problem a couple of years after purchase with the under floor fuel lines disintegrating and in a sealed floor boat was a bit interesting to say the least. I use a mobile marine mechanic who was able to sort out the problem, to be fair to the Formosa manufacturers they came to the party with a lot of my out of pocket expenses after I called them and sent a few photos of the issues. something to check on!

Good luck with the new purchase.

Cheers,

Thommo

Thanks thommo! It won't be for a while but I'm researching now so when I'm good to go I know what to look for!

Link to comment
Share on other sites

Is the 620 cab any bigger than the 580? Have fished out of the 580 center cab several times , if your crew have good manners its no problem, if not inconvenience and arguments might ensue traversing between cabin seats and rear deck. Pretty useless protection from wind and rain imo. The half cab hard top with anchor winch is on my Christmas list.

Sent from my SM-G900I using Tapatalk

Edited by Raymondo
Link to comment
Share on other sites

Is the 620 centre cab any bigger than the 580? Have fished out of the 580 center cab several times , if your crew have good manners its no problem, if not inconvenience and arguments might ensue traversing between cabin seats and rear deck. Pretty useless protection from wind and rain imo. The half cab hard top with anchor winch is on my Christmas list.

Sent from my SM-G900I using Tapatalk

Yes the 620 is bigger! Thanks for your feedback. After riding in a 620 boat yesterday I'm convinced it's what I'm looking for!

Link to comment
Share on other sites

Yes the 620 is bigger! Thanks for your feedback. After riding in a 620 boat yesterday I'm convinced it's what I'm looking for!

You will be able to host a 3 day party at the next social with an extra 1.5 m

Link to comment
Share on other sites

There a nice boat Scratchie. I suppose it doesn't really get that cold round your way to warrant hiding behind a windscreen anyhow. Be worth you getting down to the Syd boat show next week for a gander. Hopefully they will have a display model with the side entry opposed to the transom.

On a side note I was told exhibitors are stung upwards of $60000 for floor space at the boat show, need to sell a few to cover costs.

Link to comment
Share on other sites

There a nice boat Scratchie. I suppose it doesn't really get that cold round your way to warrant hiding behind a windscreen anyhow. Be worth you getting down to the Syd boat show next week for a gander. Hopefully they will have a display model with the side entry opposed to the transom.

On a side note I was told exhibitors are stung upwards of $60000 for floor space at the boat show, need to sell a few to cover costs.

Thanks again ray! Forgot about the Sydney boat show. I want a hard top. I'll spend lots of days trolling for marlin and it will be good with the kids!

Link to comment
Share on other sites

Look at the Surtees/Bar Crusher Boats. Higher price tag but they are a better fit out IMO. Great storage and an excellent ride. They are narrower than the Formosa so very comfy underway and have a ballast hull to compensate when at rest. Build qualityis unreal, on the Surtees models. They also offer a crazy amount of factory accessories and fit out options.

They will be at the show. Really good boats. They have Centre consoles as well. I like the full hard tops myself. So so much warmer and good in summer for protection against the sun and dry winds. I like fishing center consoles when inshore and in estuaries but having a hardtop is a worthy sacrifice when offshore.

Next time I buy a new Alloy boat I am going to insist on having a VibraStop Pad installed between the motor and boat. They make a huge difference.

Congrats on the capex approval

Link to comment
Share on other sites

Look at the Surtees/Bar Crusher Boats. Higher price tag but they are a better fit out IMO. Great storage and an excellent ride. They are narrower than the Formosa so very comfy underway and have a ballast hull to compensate when at rest. Build qualityis unreal, on the Surtees models. They also offer a crazy amount of factory accessories and fit out options.

They will be at the show. Really good boats. They have Centre consoles as well. I like the full hard tops myself. So so much warmer and good in summer for protection against the sun and dry winds. I like fishing center consoles when inshore and in estuaries but having a hardtop is a worthy sacrifice when offshore.

Next time I buy a new Alloy boat I am going to insist on having a VibraStop Pad installed between the motor and boat. They make a huge difference.

Congrats on the capex approval

Good advice Recurve. Surtees definitely worthy of a look.

Link to comment
Share on other sites

I've been casually browsing for 6.5m alloy boats.

Best boat i've seen has been the Extreme boats from NZ - hefty price tag but they are seriously decked out.

A mate of mine is going to buy a trident in the next 12 months too, they aren't too bad feature wise.

Surtees look awesome, im just not sure on that beam. It may make the deck feel a bit crowded?

Edited by amkr
Link to comment
Share on other sites

I like the look of the NZ Mclay boats.

They have a " how much will this cost me to built a boat" generator

The 611 Crossover hard top is a nice looking boat and it looks like it is

in your price range

They just look awesome.

I think NZ do a pretty good job of Alloy boats.Must be all the Aluminium that they make!

I'll be up your way in November so I'll bring some beer and have a look at what you buy!

Edited by antonywardle
Link to comment
Share on other sites

I like the look of the NZ Mclay boats.

They have a " how much will this cost me to built a boat" generator

The 611 Crossover hard top is a nice looking boat and it looks like it is

in your price range

They just look awesome.

I think NZ do a pretty good job of Alloy boats.Must be all the Aluminium that they make!

I'll be up your way in November so I'll bring some beer and have a look at what you buy!

Thanks Anthony. But as I said it won't be until late next year if things go to plan.

This years funds are going on a trip to Darwin with my eldest!

Link to comment
Share on other sites

No problem.

I'm still coming up your way. I'm hoping that this time I'll be able

to catch up with Garfield for a beer. I'll PM when I know what

I am doing but its the weekend of the 12th Nov I think. I'll be at Anna Bay

Edited by antonywardle
Link to comment
Share on other sites

Guest Guest123456789

OMG Scratchie all I can say is if it were me Buying a 6.2 metre a plate boat I'd milk the experience for everything it's worth! I'd test drive EVERY good boat in the range, bar crusher, Quintrex, Formosa, stabicraft you name it. For that much money I imagine the dealers will even put you onto some fish during the test run!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...