Hello,
Does anyone know the size of the bearing on the top of the pinion gear on Shimano's Sienna 2500FB and/or Alivio 2500FA please?
I am also thinking of replacing the main gear bushes with bearings, as they are a bit sloppy, though it is not practical at the manufacturer's RRP, any tips as to supply/size would be well appreciated.
Thanks.
Welcome to Fishraider
 |
Welcome to Fishraider, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be a part of Fishraider by signing in or creating an account.
|
Shimano bearings
Started by
benny81
, Aug 19 2011 02:35 PM
3 replies to this topic
#2
OFFLINE
Benzeenees
-
- MEMBERS
-
- 307 posts
MORWONG
- Location:Wamboin
Posted 03 March 2012 - 02:51 PM
Try going to Alan Tani's website/forum and asking your question.
#3
OFFLINE
slinkymalinky
-
- GOLD MEMBER
-
- 3,725 posts
MAKO
- Gender:Male
- Location:Gold Coast, QLD
Posted 04 March 2012 - 07:12 AM
G'day Benny,
Get yourself a set of digital calipers. I got a set from an auto shop for about $20. I use them all the time to measure bearings and drag washers... then you can order whatever bearings you need, whenever you need them.
Cheers, Slinky
Get yourself a set of digital calipers. I got a set from an auto shop for about $20. I use them all the time to measure bearings and drag washers... then you can order whatever bearings you need, whenever you need them.
Cheers, Slinky
#4
OFFLINE
benny81
-
- MEMBERS
-
- 28 posts
MACKEREL
Posted 05 March 2012 - 03:20 PM
Thanks for your suggestions guys, longer term you are spot on Slinky.
