The Incredible Hull Posted November 15, 2013 Share Posted November 15, 2013 Decided to upgrade my home made switch board to something more nicer. Found an Australian made one online for only $20 and it has fuses too. Enjoy the pics! Bought 10-15 meters of wire from bunnings. Used my soldering iron to make all the connections. Tested to see if it works Close up of connections Used an angle grinder to make a hole in the seat Removed a bit of foam located inside the seat Put in the switch board and drilled into place Tested switch board to ensure it works Tomorrow gotta clean everything up, route the wires and use cable ties etc and put the floor back on! Link to comment Share on other sites More sharing options...
oz_brett Posted November 16, 2013 Share Posted November 16, 2013 They are good looking switches, I had them in my last boat but ended up removing them, I found there not water proof (if they are the same as I had) Link to comment Share on other sites More sharing options...
GaryO Posted November 16, 2013 Share Posted November 16, 2013 Give the front an back a good spray of wd/innox spray to protect it and insure it lasts longer. Link to comment Share on other sites More sharing options...
tasksta Posted November 17, 2013 Share Posted November 17, 2013 Looks good, did they come with an IP rating? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now