mike82

Good quality marine batteries are constructed very differently from automotive batteries. They are designed and built with the different application and different style of usage in mind. A good quality marine battery is more expensive than a car battery of the same size because: 1: They have sheets of fibreglass separating the plates for vibration resistance. 2: They have a different plate design also for vibration resistance but more so to suit the application and "cycling" of a marine battery where after starting there is not a large alternator to recover the battery (like in a car) so they are designed to charge faster. 3: Most will be a semi deep cycle construction. Whilst not a purpose deep cycle they will be built to handle repetitive light charge/discharge cycles. An automotive battery is designed to provide a large staring current in a short burst then be recharged by the alternator before doing it all over again. While a boat battery is designed to provide the start current, get a light charge, then provide power for lights, radios, sounders, bait pumps etc while anchor, then provide a start current and accept a light charge current as fast as possible on the way home. So while a car battery will work, there is a reason why they design and make a marine battery, and why they are more expensive, and why they will last longer.

At least you've been getting out there and giving it a crack while relaxing! P.s Few people will out-fish Mick (unless he gets sea sick! ) If he was using his tassie "backwards" sideways or upside down, copy it!

Hi fishingphase, will your outboard be charging the battery? If you do overnighters with lights, bait pump, sounder etc running I would suggest a (century) NS70M battery. Overkill for starting your 25hp but will give you plenty of reserve for accessory run time. If you mainly want it for starting and don't plan on running many accessories for longish periods of time and also want to keep the weight down then go for a D23RM (century) battery.

Hay PREDATOR. Have you got standard globe type lights or led's? What happens when you put a blinker on and put your foot on the brake at the same time? If the brake lamp or all stop/tail/flash stop working, or all the globes flash very dimly, it will be an earthing problem. PM sent.

Yep I have! Trod on one, snapped the top 1/3 off and was replaced no q's asked but had to pay about $180 for a $500 dollar rod. About a year ago they changed the expeditor rates to vary in accordance with RRP of their rods (instead of being a flat rate). So yes the price will vary. All the G.Loomis suppliers will have a replacement price manual. So if you intend to buy one ask the supplier what the expeditor is on that exact model (hopefully you never have to use it!)

Which "connector" are you referring to? The 7 pin plug you connect to the car? If so check the socket on your car, if this is dirty and/or rusty it will affect the plug on the trailer in no time. Also if the wiring is corroded at all when you fit a new plug this can also affect it's performance. A thin film of electrical contact grease can also prevent corrosion but the downside is that it can trap dirt and dust in the grease.

Nice session! Sounds like your really loving it.

The above is correct with the red lead swapped (to the 10A position), the multimeter set to 10A then put in series with the red lead (of the multimeter) on the terminal post and the black to the (removed) battery cable. This creates the circuit as it runs through the multimeter. If the battery in the boat is flat, you will get a slightly lower multimeter reading than with a fully charged battery. Don't attempt to start the engine with the meter in as its internals are only rated to about 10A. Hope this helps.

No that was not me. I would have been well round the side by then. I did come across those gents about 1/2 hr later. As well as a large group pulling rocks away from the dam wall trying to catch a yabbie......not very smart pulling rocks away from the bottom of a big rock wall?? Im unsure of the barometric conditions effect on trout, never taken a lot of notice (maybe I should start writing conditions/catch rates down) I just go when I can! Delta Electricity pumps water from Lake Lyall to Lake wallis (at the power station) then up to TCD. They then let TCD gravity feed or pump down to lake wallis when needed. I don't think they pump from TCD back down to Lyall? Cheers.

Nice pair of fish! I was out there yesterday as well (although a lot later), and couldn't believe how much it had dropped in the last few months! Walked the western bank and only saw one fish, and heaps of yabbie claws scattered along the bank. Fished with a celter for a while then for a couple of hours (after I noticed the yabbie claws) with a squdgie pro lobby hopping close to the bottom but no hits or follows so ended up calling it a nice day out. Well done!

Cant believe no one has taken you up yet! This is the best time to fish port before it gets inundated by the tourney's in a couple of weeks! Wish I could!!! Really miss fishing up there this time of year and the fun of the shootout/inter-club Good luck guys!

Talk to the site sponsors Huett Marine. Contact details HERE. Let them diagnose it first before spending big dollars.

What does the back of the Tach look like? What are the terminals labelled? It may have 4 terminal posts: send-tach wire, ign-ignition positive, gnd-ground/earth wire, lt-light positive. If thats the case you probably won't have to have a separate negative wire for the light. It will run from the gnd terminal to the globe within the light or it may just earth the case of the gauge.

Thanks, I remember what the sun looks like now! Brilliant photos Ray!

Not sure bout the deep divers for marlin? But I have got a couple on the Williamson blue garfish with the pink skirt over the top in the shotgun position. I would probably suggest re rigging them from the get go as they aren't particularly strong. As for speed, Depends on your boat and conditions but Generally between 5 - 10knots (about 8knots (not km / ph) is usually ideal) Im no expert but I think 8km/hr is a bit too slow? Please correct me if I'm wrong. As long as the lures are not sitting under the surface all the time (too slow) but not bouncing out of the water all the time (too fast) you should be ok. You want the lure to be "swimming" nicely with a nice trail of "smoke" (bubbles) behind. Like I said I'm no expert but hope this helps.