Jump to content

squidboy

MEMBER
  • Posts

    402
  • Joined

  • Last visited

Everything posted by squidboy

  1. Best to go with a skid trailer rather than a roller one. Try looking up some of the more popular boat trailer brands and you can see what is available.
  2. I have a Seastar setup. I highly recommend it
  3. Get a welder to weld a mount plate bow to stern direction. You will need to cut the rail. There us a place I taken point that does all weld repairs fir a popular boat starting with Q
  4. squidboy

    PejarDam

    Is there much water left in peejar?
  5. pm me your number, had the exact issue and fixed it for good.,
  6. I got an old racing seat weight weighing in about 18kg. It's yours for $30 I am in Ryde, PM me if you are interested.
  7. Hello Raiders I am heading to Port Macquarie shortly and was in need of some help. I want to try and fish outside for snapper. Just wondering whether anyone would have some generic GPS marks that could help me as a starter. Any assistance would be greatly appreciated. PM me if you like
  8. Prop size seems ok, maybe drop the motor on hole spot. You should get better holeshot but a lower top speed by about a knot or two.
  9. AGM 100amp. 10 years old and still going strong. Important to have a good battery charger.
  10. What about running a hose through the bait pump? Sometimes there are leaks throughout seals. Like this https://vimeo.com/179553448
  11. Send me a PM of your number. It should be the live well but it's easier to explain over the phone how to fix it. Every quinnie built leaks from their live wells
  12. Spray it with penotril, you will never see rust again
  13. Anyone have a humminbird onix sounder? Just wanted to talk to someone about what they think of them. Pm me if you can help
  14. Buying a bigger boat that needs more thrust.
  15. Stewy, so are you charging your 24volt set up with a 12 volt charger or a 24 volt charger?
  16. I'm running a 15amp ctek charger
  17. Looking at upgrading to a 24 volt minn Kota. Going to run two 12 volt batteries. Just wondering whether I will need a 24 volt battery charger or will a 12 volt do. Both are the same type, age, condition and capacity of battery. Also wondering whether it would be OK to charge them and leave them on trickle charge together? Thanks for any help in advance
  18. Few other things then: 1. Is your hull clean like new? This creates drag if not 2. Is the motor serviced and the oil is at the right amount? 3. Have they changed the plugs lately and did they fit the correct plug number?
  19. Agree with SquidMarks. Try getting some 100lb mono line and clear out the speedo inlet hole. It is in front of the dog leg of the motor. There maybe a small price of junk in the inlet so less water passes through. Make sure when you do this you get the line all the way to the bottom of the motor cause there is a 90 degree turn about 10cm into the motor. Good luck
  20. Pm me your number and I'll call you about all the good n bad
  21. I too have a 450. Fished in shallows for whiting, off to the 12 mile, gone for Marlin, kings. Very versatile boat. I have a yammie 60 four stroke and it does 32 knots.
  22. squidboy

    Led lighting

    You can also have a dimmer switch on LED lights. This should ensure you don't go blind but still can see everything perfectly. Here is my boat
×
×
  • Create New...