darynxbcoupe

I have had the boat back on the water a couple times, last time conditions were very flat and only had 50 litres of fuel on board. Just my mate and I and still could only get 28 knots. The boat doesn't take any water in the hull from rain and hull is a dry hull

Fuel is always fresh as I use it all the time

Going to have to check these points, the hull is very clean so maybe plugs

The speed is coming through the GPS

Hi All, I have a f115A coming up 2 years old now with 150 hours on it, when I first bought my boat the top speed was around 31-33 knots, now I only seem to be getting 27-29 knots. I am running the same prop. Does this sound like something wrong with the engine?

I have a Formosa 580 in the tomahawk range, the trailer has rollers. Best trailer I have had. I heard from the dealer that the " classic" range needs to be skid as they are not high tensile alloy as the " tomahawk " range is high tensile alloy and can go on rollers

It is all very tight, I think I might need to ask the supplier

This is a new prop, never hit anything as its only got around 20 hours on it.

Hi All, I have a solas SS prop Rubex NS3 on my FA 115 Yamaha, when I first put it into gear at low rpm it vibrates quite bad...when I put a bit more throttle down it is sweet. Has anyone had this with a propeller before? Cheers daryn

I have just played with Simrad and thankyou as It has gone, easy when you know how... thanks again Jewfish

Okay, I wouldn't have thought about that..Thanks

Thanks heaps Jewfish for your help, I will plug in unit and give it a go. My mate told me to do the same thing and get a cable to learn inside rather than on the water. Thanks Daryn

Thanks for that,

Hi All, I have a Nss9 Evo 2, I got a structure scan transducer fitted and since then I get tracks really thick as wide as an inch... I have been told the bellow answer, I cant seem to work out how to fix this, any help would be much appreciated Hi Daryn u have structure over on in chatting option, turn this off and it will disappear. Cheers Daryn