Shiremm
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Everything posted by Shiremm
-
I would recommend a 80hp Yamaha or a 90 Suzuki. The Etec is ok but a 4 stroke will be better for trolling. Sent from my iPhone using Tapatalk
-
How many hours are on the outboard? Sent from my iPhone using Tapatalk
-
It's common on those motors to have an oil leak from the bottom main seal. Please include any pictures you have. Sent from my iPhone using Tapatalk
-
loa 16' 7" beam 7' 2" weight 900 lb hp 30 - 120 Sent from my iPhone using Tapatalk
-
I would not recommend rebuilding a 95 model engine it's 20 years old and will probably need more repairs in the coming years. There is a sale on Yamaha motors at the moment pm me if your interested and I can price you up on a new engine and possibly trade yours in. Sent from my iPhone using Tapatalk
-
What sort of boat is it? Sent from my iPhone using Tapatalk
-
If one battery can't start a 115 Yamaha you definitely have a problem Sent from my iPhone using Tapatalk
-
You need to get your batteries, charging system and battery switch tested. You should have one deep cycle battery installed as well as a starting battery. Sent from my iPhone using Tapatalk
-
When was the last time you had the fuel pump overhauled? Is there any water in fuel filter? Sent from my iPhone using Tapatalk
-
What sort of outboard is it? Sent from my iPhone using Tapatalk
-
Post some pictures of what you find and how you re make the floor. I have made a couple of them before but I have to do the floor in my Stacer soon and I'm looking at changing it from ply wood. Sent from my iPhone using Tapatalk
-
HDPE you can pick it up in a 12mm sheet for about $150 a square metre. And you will never have to worry about doing the floor again. 2mm or 3mm alluminium will not have the structural integrity to be used as a floor. Sent from my iPhone using Tapatalk
-
Have you looked into using plastic? Sent from my iPhone using Tapatalk
-
The jockey wheel uses a worm gear to turn a threaded rod to raise and lower the trailer. When the wheel is all the way up the rod can completely unthread and come out. You should be able to fix it by taking the weight off the wheel and and trying to locate the internal rod in the top section with the thread in the bottom section. Sent from my iPhone using Tapatalk
-
Hi Brett, What sort of boat do you have? Please include pictures. Regards, Hayden Sent from my iPhone using Tapatalk
-
What about a 1703 centre console Trophy
-
If there is no oily residue around the rams you probably have an internal leak check that the pressure release screw in the side of the trim unit is tight. If you are worried about it or if it gets any worse the pump assembly would need a reseal.
