Jump to content

rob roy

MEMBER
  • Posts

    21
  • Joined

  • Last visited

rob roy's Achievements

MACKEREL

MACKEREL (3/19)

0

Reputation

  1. Hi, i use the David from Como marina,to be honest he is very particular, almost anal, but i know that what i pay for is done to a very high standard, and his price is fairly reasonable. Regards Roy. Ps I would use Huey but the distance to me is too far.
  2. Hi Squidboy, That's probably the best decision that you have made, it's not worth the risk. Regards Roy
  3. Hi, it's a really good ramp compared to some of the other ramps i have launched from, but beware as the summer weather creeps in as you will experience the dreaded jet skiers who don't seem to have any ideas on what etiquette means, also i have been approaching the jetty at low speed ready to dock when people towing tubes have cut in front of me which in my opinion was downright dangerous, great to use during the week, but not at weekends. Regards Roy
  4. Hi, My two cents worth, i had the se 300, on my previous boat, a Haines Signature 460br powered by a 4 stroke mercury 75hp, my son and i were belting along at about 35mph on the Port Hacking in very calm conditions when it flipped on to its side, i managed to pull back the throttle and it righted itself, scared the living crap out of me and my son, i wrote to Haines telling them what had happened [without mentioning that i had a foil fitted ] they replied saying that they reckoned i must have a foil fitted, and if i removed it that it would never happen again, it only happened once in almost 200 hours of boating, but its not worth the risk. Regards Roy
  5. Hi Guys, Just returned from Fiji, went out on my first ever fishing charter, totally different from anything that i imagined it would be. I was the lucky one that was in the chair when this monster struck, i was physically exhausted when i finally got it to the boat, it fought every inch of the way, The only disappointment was for the other guys on the charter as we only landed mine and another small tuna, we got busted off on about five other occasions, the guys from the boat said the reason we didn't get too many hook ups was because the sea was far too flat,anyway i was pumped, never heard a reel make that noise before. Regards Roy
  6. Hi Guys, apologies all round, just checked my receipt, my dealer charged $400 plus parts for the 20 hour service, and the parts came to $170, fuel filter and filter kit was $72, , oil and grease $38 environmental levy $25 and impeller $35, [ had an issue of engine overheat warning horn coming on ] was told the impeller wasn't worn enough to send back under warranty, but since changing the engine has been running nice and cool, still thought i shouldn't have had to pay for it though. Regards Roy
  7. Hi, its a 135 hp optimax, the dealer i bought it off charges $500 plus parts for a service, and the total cost after my 20 hour service was $650, i had a few minor issues with the smartcraft set up and the trailer that i wanted them to sort out under warranty so that's why i took it to them, i'm going to shop around for my next service. Roy
  8. Thanks Guys, will wait till March for its next service, really couldn't afford another $650 at the present time. Regards Roy
  9. Hi, I have just noticed a sticker on my boat put there by the people who did my 20 hour service, it says next service due at 50 hours, i have checked my service book and there is no mention of a 50 hour service, firstly is this going to affect my warranty if i don't get it done, and is it important to have this done considering i'l be having my annual/100hour service done in March next year, or is this just a way of getting more money out of me by this particular dealer. Regards Roy
  10. I know it's not the done thing, but when you get the key, why don't you get a copy made and have one for future trips. Regards Roy
  11. Nice whiting, i was in one of the boats that slowed down and watched you reel it in, at least you had better luck than us, we tried the end of the runway, Ramsgate baths, and a few other places and came up with nothing, never mind there's always next week. Roy
  12. Hi Guys, i also launched at Grays Point today, had to wait half an hour until the concrete mixer got out of the road, the guys there said the pontoon will be operational on Saturday, i don't know if its the fencing that is still in position, but i seem to think that it's not as wide as it used to be, anyway seabreeze forecasted 0.8 swell but in bate bay it was a lot bigger, unfortunately this was the first time i took my 12 year old offshore, and he was a bit scared, also the fish weren't biting for us, ah well another day perhaps. Regards Roy
  13. rob roy

    At Last

    Hi Guys, Grays Point boat ramp is now open, well the ramp is open, the pontoon is still closed and yet to be finished, went down Sat and Sun, plenty of parking as most people didn't realise that it was open, really fed up with inconsiderate people who had their cars parked in the car and trailer spots, it's well signposted that these spots are for car and boat trailer, will be a real problem when it gets busy. Regards Roy
  14. rob roy

    Optimax 135

    Hi Huey, thanks for that, i'm getting about 1.5 at idle and about 7 at 3000rpm, engine temp is between 50 to 60 at cruise, i was a bit worried that my water pressure was a bit low, but feel better now you've reassured me. Regards Roy ps you should or maybe have got an enquiry about the 580 breeze from a mate who is looking for one, i showed him yours on the net and he seemed quite impressed.
  15. rob roy

    Optimax 135

    Hi Guys, i've got an optimax 135hp all connected up to smartcraft, only problem is i don't know what figures i should be expecting with water pressure at idle and in cruise, also what should the engine temperature range be. Thanks Guys Roy
×
×
  • Create New...