delboy030767

Finally got the axle and hubs installed should be a a 100% better than the seatrail

I might replace the front and Middle rollers at least they will be all the same

I have a 2007 seatrail boat trailer I decided to replace rear 6 inch keel roller as it was not spinning as spindle bolt was seized on I had to grind it off,I brought new spindle and roller from rtm and replaced the rear one,I noticed the size in the middle section of the roller is 5mm in diameter bigger than the original one,I was wondering do I need to replace the other 2 rollers or not I was going replace the middle roller as the spindle was rusting as well

Thanks everyone I decided to replace axle and hubs with a holden hubs and axle this was the cheaper option rather than buy a new trailer the trailer it self is in good condition maybe a couple of years down the track I may decide to upgraded the boat

Hi does any body know how much it would cost to buy an Australian made boat trailer to suit a quintrex 3.85 quintrex explorer eclipse hull 2007 model with a 15 hp 4 stroke mercury, I looking to upgrade from seatrail as seatrail don't make hubs anymore as its more than 10 years old as they had 10 years of stock and sold the bussiness 4 years ago so I could either buy replace axle and hubs to Holden hubs or seatrail in which I prefer not to use seatrail.I brought the boat with trailer 5 years ago 2nd hand not relising seatrail was chinese made.

thats a good size whiting i was fishing down that lake just before xmas it does produce some good quality fish

Hi fellow raiders I'm heading down to burrill lake on Saturday for 7 days just wondering how its fishing and where is the best place to go as i don't know the lake to well I'll be staying at the big4

Sounds like you had a great day you just got to try different baits and techniques

top job good to see you catch some fish out of the hawkesbuy

Good to see some action well done

Well done lake macquarie seems very productive i seem to do better there than hawkesbury at times its always good to try different places

Thanks guys for info will try and get there over weekend

nice work

You could try the north channel at the entrance just over the Entrance bridge very good flattie spot some times it can be a little weedy

Does any body know if upgrade of parsley bay boat ramp at brooklyn is open yet

Nice hall of prawns mate

Nice size bream mate

I fishing upstream west from the bridge near sandflats just before open part of lake

Took the day off work yesterday to go fishing after getting boat back from workshop only fish caught was a toad ,fish for 3 hrs it was constant battle with the wind so i decided to call it quits and head home

Put the boat in at brooklyn yesterday morning at 6.00 tried every where using baits soft plastics,with zero results water temp 20deg weather a little breeze fished for about 4 hrs then decided to call it a day and headed home,well thats the way it goes some times better luck next time around.

Yes it was busy due to the Arrival Jessica Watson who being sailing solo around the continent for 7 months

I have a 10ft tinnie and i have a hummingbird paranha max 220 fish finder and i use a 12 volt motor cycle in which i connect allagator clips to the battery it draws very little power and i would run led lights as well it is a brighter light and uses very little power and last twice as long,i only payed a couple of hundred dollars for fish finder good luck cheers delboy030767

well done nice size snapper cheers delboy030767

Does any body know any decent beach fishing spots i could try either around wollongong area,central coast,northernbeaches southern beaches and best baits to use i mainly use pillies and don't do alot of this type of fishing cheers delboy030767