Jump to content

Live Bait stuck in Over Flow " Solved I Hope"


oziodin

Recommended Posts

It has Happened a few time only where "live Bait " has become stuck in the Live Bait Tank :Blocked Over Flow There for Water starting to Fill the Boat with Water .

Have heard of others miss fortune , Luckily mine haven't come to that & hope it never Will { I do have several Bilge Pumps in the Boat.

Several times Live Bait has become stuck in outlet of Bait Tank.

Thought there has to be a Way to Minimise that from Happening.

Also there is different outlets from Tank to Tank but the Principle is all the same .As you have to have continue to have Water Flow to keep the Bait "Alive".

Some Times, I can Kick myself for not thinking of it earlier and it probably it has been around for Donky's Years but never paid attention to it . I'm sure Others is in the same Boat as me.

so I like to share this.

Hope someone out there will benefit form it. " I'm always trying to Improve my Boat setup with the little things.

Simple as getting a PVC pipe that's fits the Outlet in Live Bait Tank make it 10-15 inch long and fit an end Cap and Drill 10mm Holes all over it. there won't be any Blockage from Live Bait again : small Yakkas,Slimey's or small Squid . there will be a continue flow of water and it won't flow over the side and into the boat ( if you have the tank inside the boat)

The Cost is below $10

Here is some Pic of the Contraption .

Cheers Oziodin :1fishing1:

post-32014-0-04960100-1428386917_thumb.jpeg

post-32014-0-17056600-1428386931_thumb.jpeg

Link to comment
Share on other sites

Just a thought, probably better to have the water outlet not at the top of the tank - a bit of slosh and the pump is sucking in air, better to have the water out at the bottom and the water in at the top.

If I'm understanding it correctly, you've basically solved the problem of fish getting stuck in the water outlet by modifying the outlet so there's now 50 outlets across a larger area. Unless the fish held a meeting and decided to systematically blocked the holes, you'll never have the fish blocking it again.

Is the tank plumbed in such a way that if the water can't get out, it just keeps filling? If thats the case it might be worth putting some kind of overflow port in to stop it flooding again.

Link to comment
Share on other sites

Hi amkr

Your Quote : Just a thought, probably better to have the water outlet not at the top of the tank - a bit of slosh and the pump is sucking in air, better to have the water out at the bottom and the water in at the top.

Thank you for your response I'm open to Ideas , when having the Outlet on the Bottom of Live Bait Tank how do you maintain the same Water level in the tank ?(unless you have a water level maintainer set to a set water level ( possible the same system as Toilet cistern) that cuts of the pump when full but would have to be on timer or other to maintain Water Flow with Oxynated water , to keep the fish alive ?)

I got a Timed Live bait Tank Timer that can switch the Pump on for a minute ( and can be time to switch on any time between 1min - 12min interval !

also I don't understand how the pump can't suck in air as it directional Pump (unless the intake is above water line ) and even if it did it wouldn't matter as it's not working on Gravity . if there is a way that improves or better the system . I Like some Input and if I have to I change the whole system if it Improve the live Bait issue.

Ps : I truly appreciate all the input for and against.

Cheers Oziodin :fishing1:

Link to comment
Share on other sites

it's the outlet so water is going out of the tank , usually when it being blocked by slimey,yakkas or squid it block the water running out and will flow over the egdes and in to the boat unless its mounted outside hull.

C :fishing1: heers Oziodin

Link to comment
Share on other sites

Hahaha reading all this made me laugh.

Oziodin, looks like a good solution to a common problem. Nice job.

I had the same problem mainly with Gars blocking up the outlet. I had a broken Enviro type net I kept. I cut up a small circle to fit over the water drain outlet.

Link to comment
Share on other sites

It's a simple thing that can ruin anyone's day ,With such a simple solution !! No Brainer. Feel like giving myself an upper cut for not thinking of it earlier. I thought there would be Others in the same Boat so to Speak !! if it's helps just 1 Raider out there it was worth the post .

Cheers Oziodin :fishing1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...