Fab1 Posted October 29, 2016 Share Posted October 29, 2016 Here is a view of the impellor,notice the bend in the vanes.They're bent to the left when looking down from the top telling me that the driveshaft turns clockwise to the right.Keep that in mind for later. The impellor is mounted to the drive shaft over a woodruff key that prevents the impellor from free spinning on the driveshaft. To remove the impellor will need gentle prying with a screwdriver in between the impellor and base plate.Impellor removed exposing the woodruff key and base plate.Note the locating dowels.Be careful sometimes the woodruff key falls out and other times it's stuck good like mine,either way don't lose it as you'll need it later. The woodruff key.Now the base plate can be removed up the drive shaft exposing the drive shaft seal. Continued part 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now