AhhTeaAhh Posted June 18, 2019 Share Posted June 18, 2019 Previous owner of this boat made an absolute hash of installing rod holders. All $15 rod holders whose locking cogs had worn away, also installed with non stainless screws. After removing them and installing railblaizer holders we are left with this mess. Also worth noting that this is clearly not the first time he has installed them... Nautiglass boat (obviously fibreglass.) Any recommendations on how best to fill them? Cheers A Link to comment Share on other sites More sharing options...
deek Posted June 18, 2019 Share Posted June 18, 2019 I guess it depends if you want to match the colour. Otherwise, you could use a silicon or a product called Selleys Knead It Aqua Link to comment Share on other sites More sharing options...
Berleyguts Posted June 18, 2019 Share Posted June 18, 2019 I’d glass over them. Shouldn’t be that hard. Suggest it would be better fitting flush mounted, gimbal mount rod holders. Link to comment Share on other sites More sharing options...
noelm Posted June 18, 2019 Share Posted June 18, 2019 Depends if you just want to fill them up, or make it look like new, that involves colour matching, simply filling them will be easy, best to get a big drill and kind of countersink them, then get some resin and some orange pigment, tint it to be close, then add some talc and make a paste before adding the catalyst (hardener) put some tape behind the holes so the mix doesn't just push through, use a plastic spatula to just fill the holes with the resin paste, don't put too much on, just fill flush. Link to comment Share on other sites More sharing options...
AhhTeaAhh Posted June 19, 2019 Author Share Posted June 19, 2019 23 hours ago, Berleyguts said: I’d glass over them. Shouldn’t be that hard. Suggest it would be better fitting flush mounted, gimbal mount rod holders. Could you elaborate on "glass over them?" Re the railblaizer rod holders, they are great for our use as they are strong but also versatile in terms of being able to use them for other things. Link to comment Share on other sites More sharing options...
AhhTeaAhh Posted June 19, 2019 Author Share Posted June 19, 2019 21 hours ago, noelm said: Depends if you just want to fill them up, or make it look like new, that involves colour matching, simply filling them will be easy, best to get a big drill and kind of countersink them, then get some resin and some orange pigment, tint it to be close, then add some talc and make a paste before adding the catalyst (hardener) put some tape behind the holes so the mix doesn't just push through, use a plastic spatula to just fill the holes with the resin paste, don't put too much on, just fill flush. When you say resin, what do you mean? Epoxy I presume? Having not worked with epoxy before would be great if you could say the exact brand that you use or recommend! Link to comment Share on other sites More sharing options...
Berleyguts Posted June 19, 2019 Share Posted June 19, 2019 17 minutes ago, AhhTeaAhh said: Could you elaborate on "glass over them?" Re the railblaizer rod holders, they are great for our use as they are strong but also versatile in terms of being able to use them for other things. I just meant get some fibreglass cloth and resin... like patching a ding in a surfboard or similar. Re the existing rod holders... I assumed they’ve been repositioned a few times, as they would eventually work loose where screwed down. I like recessed stainless steel rod holders... strong enough to handle kingfish etc. 😉 Link to comment Share on other sites More sharing options...
Rebel Posted June 19, 2019 Share Posted June 19, 2019 Hi, Go see a Surf board builder. He will tell you how to do it. It isn't hard. Cheers. Link to comment Share on other sites More sharing options...
noelm Posted June 19, 2019 Share Posted June 19, 2019 Yep, depending on how much you need, a surfboard place, or a boat repair place will sell you some, and probably have pigment, you can buy repair kits from boat shops, but it's an expensive way to buy it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now