MacLon Posted August 2, 2020 Share Posted August 2, 2020 Hi everyone I am having some trouble working out what prop to buy to replace a damaged plastic prop. Everone keeps asking me to find the pitch but i only have a serial number on whats left of the prop. No dealer will help they just ask for the pitch and diameter. I have attached a photo of the prop will the only detail available and worndered if anyone elae had been down the same path. Please help!!!!! Regards Matthew Link to comment Share on other sites More sharing options...
frankS Posted August 2, 2020 Share Posted August 2, 2020 For starters it's not a plastic prop it is alloy. Take the prop off and take it to a marine spare parts dealer and I'm sure they could match it up. There are a few good marine wreckers here in Sydney but I see you are on Central coast. Frank Link to comment Share on other sites More sharing options...
kingie chaser Posted August 2, 2020 Share Posted August 2, 2020 (edited) Agree wih frank, take the prop & a better picture of the ID plate to a boat spares place in Gosford. There are plenty of them, your local mercury dealer is- 1) Insinc Marine 02-43244300 lee@insincmarine.com.au 20 Dell Road West Gosford , NSW 2250 I take a picture of my ID plate with me when I go for spare parts. Alternatively enter your motor details into something like this & it might give you a part number, you could then order it online but imo its better to go direct to a store, that way if there is something wrong with it you can exchange it https://www.perfprotech.com/mercury-marine-parts-catalog/searchserial Edited August 2, 2020 by kingie chaser Link to comment Share on other sites More sharing options...
PaddyT Posted August 2, 2020 Share Posted August 2, 2020 umm contact Mercury Marine? Link to comment Share on other sites More sharing options...
noelm Posted August 2, 2020 Share Posted August 2, 2020 Second hand, call Arizona Outboard Wreckers at Charmhaven, if you want new, just go to any Mercury dealer, they will probably have one in stock. Link to comment Share on other sites More sharing options...
noelm Posted August 2, 2020 Share Posted August 2, 2020 Have you taken the prop off? Quite often the size is stamped on the back near where the thrust washer goes. Link to comment Share on other sites More sharing options...
kingie chaser Posted August 2, 2020 Share Posted August 2, 2020 (edited) 29 minutes ago, noelm said: Have you taken the prop off? Quite often the size is stamped on the back near where the thrust washer goes. The prop has some sort of serial number on top of it but I wouldnt trust that anyway as I dont think its the original as I have never seen a factory alloy prop with zero paint finish on it, stainless yes. I know they lose a bit of paint from high rev's & over time but that thing looks aftermarket? Thinking about it, it does also look like its composite plastic having a second look which makes sence having no paint on it! So what is the actual motor @MacLon? Edited August 2, 2020 by kingie chaser Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now